LED Panel Surface Mounting Kit-1200 x 300 (plastic corner model)
LED Panel Store
- Suitable for LED Panels up to 15mm deep
- Plastic corners
- 1200mm x 300mm x 43mm
- White powder coated finish
This Surface Mount Ceiling Frame is perfect to mount our LEDPanelStore LED Panel Lights in locations without suspended ceiling grid (e.g. plasterboard ceilings) . Surface mount kits are ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
The kit screws to the ceiling. The panel is then slid in, and the remaining side then screws on to complete the installation.
The frame has sufficient depth to accommodate the LED driver and one of our emergency packs if required. (the driver should be placed in the centre of the panel to allow good heat dissipation)
All LED Panel Store panels come with a no quibble 5 Year Warranty and a 14 Day Money Back Guarantee.
-
Great Quality easy to fix,comes with all the fixings.
Posted On:
-
Good as expected
Posted On:
-
Does the job perfectly.
Posted On:
-
Good quality
Posted On:
-
Once the frame is assembled and the ends clicked in, I hope we dont have to get to the panel after as its going to be near impossible to removed the ends without destroying the frame plastic corners. Better to have some small screws in one end holding the end plate. the plastic corners will harden over time then shatter when levered out.
Posted On:
-
Fixed to plasterboard ceiling Everyone Very good
Posted On:
-
I was advised over the phone that the kits are flimsy until fully installed. This is very true. However, I did not want the other type where the screw heads show on the corner joints so I used these. Once up on the ceiling with the final end section fully inserted they look OK and are certainly strong enough for the job. The website makes it perfectly clear that these units are not suitable where the emergency kit is required but this was not a concern in my case.
Posted On:
-
Easy to assemble, great price
Posted On:
-
I have now installed these lights across my whole Gym. Quality is 100% 👍
Posted On:
-
Great item, wish it was available in ***K!
Posted On:
-
No instructions however not rocket science to put together. Simple to install and looks good when light installed.
Posted On:
-
Product looks very good haven't fitted unit up yet
Posted On:
-
does what it says on the tin. Looks nice and tidy, and the sparky didn't seem to struggle installing it.
Posted On:
-
Fits perfectly
Posted On:
-
Excellent condition
Posted On:
-
Perfect
Posted On:
-
Easy to install once it is marked out for position.
Posted On:
-
quality product need to be market in "GOWERS" basic English.
Posted On:
-
Look fine but not fitted yet
Posted On:
-
does what it says on the box
Posted On:
-
Comments made on previous order also apply to this.
Posted On:
-
Easy to assemble, Tidy finish.
Posted On:
-
Easy to use and fit and looks good.
Posted On:
-
Does the job nicely and looks good
Posted On:
-
Easy to fit and looks really good in.
Posted On:
-
I ordered 5 panel lights after excellent experience of previous orderWhy do I have to review each individual light?
Posted On:
-
Fits together very well.neat finish.
Posted On:
-
Very good product. Easy to fit and gives brilliant light. Would recommend.
Posted On:
-
Extremely easy to assemble. High quality mounting kit. Very satisfied.
Posted On:
-
Very good easily installed
Posted On:
-
does not make it sit flush with the ceiling as I had thought
Posted On:
-
Perfect, exactly what I was looking for and easy to assemble.
Posted On:
-
Check if you have enough clearance to slide panel in from the end.
Posted On:
-
Looks good and easy to install
Posted On:
-
See comments on the 300x300 kit.
Posted On:
-
ant fitted then yet do not be in shutch a hurry
Posted On:
-
Product is for an aviary I would recommend this for similar situations
Posted On:
-
This fitting kit was exactly right for our LED panel lights and drivers and was simple to fix to the ceiling. However, the LED panels are 1200mm long and need to be slid into the fittings from end - be aware that if there is not a 1200 gap between the fitting end and the wall, one side will have to temporarily left to swivel. The appearance of the fitting is excellent, however one of the corner mouldings was in three pieces, due to a molding defect. Rather than the hassle and time of return, I was able to make an effectively invisible repair using pvc pipe weld. Shame Otherwise a perfect 5.
Posted On:
-
Very happy and sure we will order more. Please update on offers and panels
Posted On:
-
Now in place in the garage replacing the old flourecent lights. What a difference.
Posted On:
-
Bracket easy to assemble, fit three pieces in place and then slide in panel through short end. Then clip inlace.
Posted On:
-
All excellent products
Posted On:
-
Sits flush against the ceiling. With the panel in, it almost looks recessed. Excellent.
Posted On:
-
Good but I wonder how easy it will be to unclip if panel needs to be taken down.
Posted On:
-
Great product, great delivery
Posted On:
-
very easy to put up.
Posted On:
-
Once installed no way to open frame again
Posted On:
-
god
Posted On:
-
Perfect
Posted On:
-
It does the job and easy to install.
Posted On:
-
Next time will buy with metal corners
Posted On:
-
Quality product, easy to install
Posted On:
-
Easy to fit and looks good
Posted On:
-
Easy to fit
Posted On:
-
A little fiddly, but well worth it, as it sets off the panel well
Posted On:
-
Easy to use although the use of plastic clips for fixing make a replacement of the LED panel very difficult.
Posted On:
-
Easy to fit.
Posted On:
-
the screws placed internally don't hold the sides together as well as they could - i would have preferred predrilled holes on all sides so I could place all the screws externally. But looks good, and easy to install the light.
Posted On:
-
Easy to assemble, but I had noticed on some reviews of this kit that people had to drill additional holes as only two were evident. Although not in the instructions, you apply six screws on the inside to nip the rails together, then slide the panel in & finish off by fitting the end frame & fit the last two screws from the outside.
Posted On:
-
the frame keeps the light fitting neat against ceiling, not strictly necessary but looks better, i have told a colleague about these lights and frames
Posted On:
-
Support for LED panel in office and workroom.
Posted On:
-
Excellent product advice and service
Posted On:
-
Works well relatively easy to fit.
Posted On:
-
No complaints - they look good although they were a bit fiddly to install so they remained square (not a big deal though & easily dealt with via a tape measure & common sense).
Posted On:
-
wanted it for domestic use and would prefer it to be less industrial but it works very well.
Posted On:
-
Great Product
Posted On:
-
Great value surface mounted frame. Matches the LED panel perfectly in colour. Very simple to fit.
Posted On:
-
A good, simple mount enabling me to position my LED panels on the ceiling.
Posted On:
-
have used these lights in the past for suspended ceilings, first time for standard plasterboard ceilings no problems using this kit looks well
Posted On:
-
Was as we wanted - easy to fit looks fine
Posted On:
-
look good. no reason to doubt they'll do the job
Posted On:
-
Instuctions need revising, lots of holes and screws but only shows where 2 of the screw go, dont know if i was doing wrong but if i didnt do what i did the casings would not have been as secure!
Posted On:
-
Very easy to mount light on ceiling.
Posted On:
-
Holes should be pre-drilled but easy to fit
Posted On:
-
surface ceiling mount
Posted On:
-
easy to fit
Posted On:
-
Quite flimsy difficult to mount squarely to the ceiling. I ended up mounting onto a wooden sub frame which I then fixed to ceiling
Posted On:
-
Used the surface frame to fit under plasterboard ceiling. Easy to fix together and screw to ceiling, although we had to drill the frame as the corner fixings weren't pre-drilled as they should have been. No big deal.
Posted On:
-
Easy to install.
Posted On:
-
A very cost effective and well engineered solution to surface mounting LED panels and no doubt fit Ledpanel Store supplied panels perfectly, but the kit was approximately 2mm too small in length and breadth for the Auralum panels I used leaving small gaps at each corner - not a showstopper, but detracts from a perfect job!
Posted On: