LED panel spring clip set

76% of 100
(25)

LED Panel Store

- Suitable for LED Panels with suitable brackets
- Set of 4
- Suitable for 300x300, 600x300, 600x600, 1200x300 & 1200x600 panels

£5.10 £4.25

Set of 4 steel spring clips for use with our LEDPanelStore ultra slim LED panel lights allowing the panel to be mounted in to plasterboard.

Ideal for situations when there isn't space for surface mounting boxes and suspension is not possible.

PLEASE ENSURE THE PLASTERBOARD IS IN GOOD CONDITION BEFORE USING SPRING CLIPS

 

All LED Panel Store LED panel spring clips come with a 2 Year Warranty and a 14 Day Money Back Guarantee.

  1. Rating
    Does the job perfectly,,easy to instal

    Posted On:

  2. Rating
    Well made, suited to the task. The springs are very strong though, so be carful when installing to plasterboard. The springs can be eased off a bit by fully opening the clip and folding back in itselfwhich stretches the spring and reduces the clamping force a bit.

    Posted On:

  3. Rating
    Allows simple fitting with minimal standout from surface mounted on. They do require at least a small penetration for each clip, which will impact fire resistance of that surface if in plaster board ceiling. 2 clips / panel seem fine for 300x300mm panels.

    Posted On:

  4. Rating
    Does exactly what I needed

    Posted On:

  5. Rating
    I was making a customised install and the springs were a little to powerful for my needs.

    Posted On:

  6. Rating
    fiddly to bolt onto product otherwise ok

    Posted On:

  7. Rating
    Used these to fit led tiles into a plaster board ceiling. Worked brilliantly

    Posted On:

  8. Rating
    Didn’t use - very strong spring. Found better solution using long bolts and wing nuts.

    Posted On:

  9. Rating
    easy to use

    Posted On:

  10. Rating
    no problems

    Posted On:

  11. Rating
    The springs were too strong. Attempting to straighten the clips,into a vertical position, would bend the small bracket. In the end I drilled the frame, through the chanel holding the captive nuts, and screwed it to the ceiling with rawplugs. I noticed some reviews suggested that the springs were not strong enough. Maybe the 'quality' is variable.

    Posted On:

  12. Rating
    Sounded a good idea despite the preparation required. However, the clips are FAR too strong for the job and bend the support brackets supplied. I contacted Customer support on 5/517 but was told they were the only clips available. I was told they would get back to me on 8/5/17, but didn't. I emailed them on 11/5/17 requesting a surface mounting kit instead - but again have had no response. I definitely would not recommend this product and, from their lack of response, would not recommend LED Panel store as a supplier.

    Posted On:

  13. Rating
    Good well engineered product though they did lack both fitting instructions or any kind of illustrations hence only four stars

    Posted On:

  14. Rating
    I didn't use these in the end as I used ceiling mounting frames, but wanted one set to see if they might be suitable.

    Posted On:

  15. Rating
    Very happy with the lights, however the spring clips are set VERY close to the edge of the panel leaving no leeway for error on fitting.

    Posted On:

  16. Rating
    the springs in some clips were a little weak, but they still held the panels up ok.

    Posted On:

  17. Rating
    Bit fiddly, but easy and work well.

    Posted On:

  18. Rating
    Very awkward to use but do the trick.

    Posted On:

  19. Rating
    good

    Posted On:

  20. Rating
    Poor strength in panel and fixings.

    Posted On:

  21. Rating
    Trial samples for our new office development

    Posted On:

  22. Rating
    Would recomend to friends and have already done so.

    Posted On:

  23. Rating
    not used went for surface mounting kit,as no intructions given how to recess.

    Posted On:

  24. Rating
    great quality brilliant product

    Posted On:

  25. Rating
    Tricky to use but does the job!

    Posted On: