LED Panel Surface Mounting Kit-1200 x 300 (plastic corner model)
- Suitable for LED Panels up to 15mm deep
- Plastic corners
- 1200mm x 300mm x 43mm
- White powder coated finish
£13.20 £11.00
SKU
SMK-3012-43
This Surface Mount Ceiling Frame is perfect to mount our LEDPanelStore LED Panel Lights in locations without suspended ceiling grid (e.g. plasterboard ceilings) . Surface mount kits are ideal for offices, schools, hospitals etc. where recessed mounting is not possible.
The kit screws to the ceiling. The panel is then slid in, and the remaining side then screws on to complete the installation.
The frame has sufficient depth to accommodate the LED driver and one of our emergency packs if required. (the driver should be placed in the centre of the panel to allow good heat dissipation)
All LED Panel Store panels come with a no quibble 5 Year Warranty and a 14 Day Money Back Guarantee.
- Great Quality easy to fix,comes with all the fixings.Collected via eKomi
- Good as expectedCollected via eKomi
- Does the job perfectly.Collected via eKomi
- Once the frame is assembled and the ends clicked in, I hope we dont have to get to the panel after as its going to be near impossible to removed the ends without destroying the frame plastic corners. Better to have some small screws in one end holding the end plate. the plastic corners will harden over time then shatter when levered out.Collected via eKomi
- Fixed to plasterboard ceiling Everyone Very goodCollected via eKomi
- I was advised over the phone that the kits are flimsy until fully installed. This is very true. However, I did not want the other type where the screw heads show on the corner joints so I used these. Once up on the ceiling with the final end section fully inserted they look OK and are certainly strong enough for the job. The website makes it perfectly clear that these units are not suitable where the emergency kit is required but this was not a concern in my case.Collected via eKomi
- Easy to assemble, great priceCollected via eKomi
- I have now installed these lights across my whole Gym. Quality is 100% 👍Collected via eKomi
- Great item, wish it was available in ***K!Collected via eKomi
- No instructions however not rocket science to put together. Simple to install and looks good when light installed.Collected via eKomi
- Product looks very good haven't fitted unit up yetCollected via eKomi
- does what it says on the tin. Looks nice and tidy, and the sparky didn't seem to struggle installing it.Collected via eKomi
- Fits perfectlyCollected via eKomi
- Excellent conditionCollected via eKomi
- PerfectCollected via eKomi
- Easy to install once it is marked out for position.Collected via eKomi
- quality product need to be market in "GOWERS" basic English.Collected via eKomi
- Look fine but not fitted yetCollected via eKomi
- does what it says on the boxCollected via eKomi
- Comments made on previous order also apply to this.Collected via eKomi
- Easy to assemble, Tidy finish.Collected via eKomi
- Easy to use and fit and looks good.Collected via eKomi
- Does the job nicely and looks goodCollected via eKomi
- Easy to fit and looks really good in.Collected via eKomi
- I ordered 5 panel lights after excellent experience of previous orderWhy do I have to review each individual light?Collected via eKomi
- Fits together very well.neat finish.Collected via eKomi
- Very good product. Easy to fit and gives brilliant light. Would recommend.Collected via eKomi
- Extremely easy to assemble. High quality mounting kit. Very satisfied.Collected via eKomi
- Very good easily installedCollected via eKomi
- does not make it sit flush with the ceiling as I had thoughtCollected via eKomi
- Perfect, exactly what I was looking for and easy to assemble.Collected via eKomi
- Check if you have enough clearance to slide panel in from the end.Collected via eKomi
- Looks good and easy to installCollected via eKomi
- See comments on the 300x300 kit.Collected via eKomi
- ant fitted then yet do not be in shutch a hurryCollected via eKomi
- Product is for an aviary I would recommend this for similar situationsCollected via eKomi
- This fitting kit was exactly right for our LED panel lights and drivers and was simple to fix to the ceiling. However, the LED panels are 1200mm long and need to be slid into the fittings from end - be aware that if there is not a 1200 gap between the fitting end and the wall, one side will have to temporarily left to swivel. The appearance of the fitting is excellent, however one of the corner mouldings was in three pieces, due to a molding defect. Rather than the hassle and time of return, I was able to make an effectively invisible repair using pvc pipe weld. Shame Otherwise a perfect 5.Collected via eKomi
- Very happy and sure we will order more. Please update on offers and panelsCollected via eKomi
- Now in place in the garage replacing the old flourecent lights. What a difference.Collected via eKomi
- Bracket easy to assemble, fit three pieces in place and then slide in panel through short end. Then clip inlace.Collected via eKomi
- All excellent productsCollected via eKomi
- Sits flush against the ceiling. With the panel in, it almost looks recessed. Excellent.Collected via eKomi
- Good but I wonder how easy it will be to unclip if panel needs to be taken down.Collected via eKomi
- Great product, great deliveryCollected via eKomi
- very easy to put up.Collected via eKomi
- Once installed no way to open frame againCollected via eKomi
- godCollected via eKomi
- PerfectCollected via eKomi
- It does the job and easy to install.Collected via eKomi
- Next time will buy with metal cornersCollected via eKomi
- Quality product, easy to installCollected via eKomi
- Easy to fit and looks goodCollected via eKomi
- Easy to fitCollected via eKomi
- A little fiddly, but well worth it, as it sets off the panel wellCollected via eKomi
- Easy to use although the use of plastic clips for fixing make a replacement of the LED panel very difficult.Collected via eKomi
- Easy to fit.Collected via eKomi
- the screws placed internally don't hold the sides together as well as they could - i would have preferred predrilled holes on all sides so I could place all the screws externally. But looks good, and easy to install the light.Collected via eKomi
- Easy to assemble, but I had noticed on some reviews of this kit that people had to drill additional holes as only two were evident. Although not in the instructions, you apply six screws on the inside to nip the rails together, then slide the panel in & finish off by fitting the end frame & fit the last two screws from the outside.Collected via eKomi
- the frame keeps the light fitting neat against ceiling, not strictly necessary but looks better, i have told a colleague about these lights and framesCollected via eKomi
- Support for LED panel in office and workroom.Collected via eKomi
- Excellent product advice and serviceCollected via eKomi
- Works well relatively easy to fit.Collected via eKomi
- No complaints - they look good although they were a bit fiddly to install so they remained square (not a big deal though & easily dealt with via a tape measure & common sense).Collected via eKomi
- wanted it for domestic use and would prefer it to be less industrial but it works very well.Collected via eKomi
- Great ProductCollected via eKomi
- Great value surface mounted frame. Matches the LED panel perfectly in colour. Very simple to fit.Collected via eKomi
- A good, simple mount enabling me to position my LED panels on the ceiling.Collected via eKomi
- have used these lights in the past for suspended ceilings, first time for standard plasterboard ceilings no problems using this kit looks wellCollected via eKomi
- Was as we wanted - easy to fit looks fineCollected via eKomi
- look good. no reason to doubt they'll do the jobCollected via eKomi
- Instuctions need revising, lots of holes and screws but only shows where 2 of the screw go, dont know if i was doing wrong but if i didnt do what i did the casings would not have been as secure!Collected via eKomi
- Very easy to mount light on ceiling.Collected via eKomi
- Holes should be pre-drilled but easy to fitCollected via eKomi
- surface ceiling mountCollected via eKomi
- easy to fitCollected via eKomi
- Quite flimsy difficult to mount squarely to the ceiling. I ended up mounting onto a wooden sub frame which I then fixed to ceilingCollected via eKomi
- Used the surface frame to fit under plasterboard ceiling. Easy to fix together and screw to ceiling, although we had to drill the frame as the corner fixings weren't pre-drilled as they should have been. No big deal.Collected via eKomi
- Easy to install.Collected via eKomi
- A very cost effective and well engineered solution to surface mounting LED panels and no doubt fit Ledpanel Store supplied panels perfectly, but the kit was approximately 2mm too small in length and breadth for the Auralum panels I used leaving small gaps at each corner - not a showstopper, but detracts from a perfect job!Collected via eKomi
Related Products
£22.80 £19.00
£7.50 £6.25
£5.10 £4.25
£36.00 £30.00
£36.00 £30.00
£36.00 £30.00
